Intel Peavey ReValver MK III - Manual (Page 33)

Miscellaneous utilities
Module name = Signal splitter
Description = The signal splitter divides the signal into 2 streams. Each runs in parallel using it’s
own set of modules. In the “signal merge” module, these two streams are mixed into one signal
again. You can only use signal splitter once per preset.
Module name = Frequency analyzer
Description = The frequency analyzer can scan the audio in real time and present the frequency
content on a live display. The update speed can be switched between 50 ms and 500 ms. The
analyzer can create up to three snapshots and overlay them over each other. By hovering your
mouse over the graph you can get an accurate readout of that position. The anti-aliased display
yields a very accurate picture.
Module name = Leveler
Description = A utility module that can be inserted wherever you wish to monitor or change the
volume levels. The module monitors both the left & right channels. This module has a volume
adjust and a “Learn” button to automatically adjust level to 0dB.
32