InStep RIDE N STRIDE - Manual (Page 6)

6
Step 4. To unfold tow bar, undo locking
pin that is already inserted in
the frame and the tow bar
(Figures R and S). Remove
locking pin from the frame and
the tow bar (Figure T). Rotate
the tow bar forward so the hitch
is at the front of the trailer/stroller
(Figure U). To lock tow bar in
place re-insert the locking pin
back through the set of holes
in the tow bar and the frame
(Figure V). Lock the loop end of
the locking pin over the other
end (Figure W).
Step 5. Open the rubber hitch clamp on the tow
bar by turning the black knob counter
clockwise. Slide rubber hitch clamp
under the horizontal frame on the
bicycle. This is the side opposite the
chain. Tighten black knob clockwise
until secured. Wrap tow bar safety strap
around horizontal frame stay and clip to
metal ring on tow bar (Figure X).
WARNING: You must install the tow bar safety
strap around stay on bicycle frame
and lock it in place.
R S
T V W
X
U
TOW BAR ASSEMBLY
TO ATTACH TO BICYCLE
Locking Pin
Locking Pin
Hitch
Tow Bar
Tow Bar
Locking Pin
Locking Pin
Locking Pin
Locking Pin
Black Knob
Tow Bar
Tow Bar
Tow Bar
Tow Bar Tow Bar
Safety Strap
Rubber
Hitch
Clamp
Bike
Frame
Stay
Tow Bar