Integra DTR-7.6/6.6 - Manual (Page 62)

62
Adjusting the Listening Modes
With the Re-EQ function, you can correct a soundtrack
whose high-frequency content is too harsh, making it
more suitable for home theater viewing.
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic II Movie, Dolby Pro Logic IIx Movie, DTS, DTS-
ES, DTS Neo:6 Cinema, DTS 96/24, THX Cinema,
THX Surround EX, THX Select2 Cinema, and Multi-
channel.
The Audio Adjust menu has various settings for adjust-
ing the sound and listening modes.
Using the Re-EQ Function
1 Press the [Receiver] Remote
Mode button, followed by the [Re-
EQ] button.
Press the [Re-EQ] button again to turn
off the Re-EQ function.
Setup
Receiver
L Night
Re-EQ
Enter
Audio Adjust Menu
1 Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “6. Audio
Adjust,” and then press [Enter].
The Audio Adjust menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select a setting, and
then press [Enter].
The menu for the selected setting
appears.
4 Use the Up and Down [ ]/[ ]
buttons to select an option, and
use the Left and Right [
]/[ ]
buttons to change it.
The Audio Adjust settings are
explained on the next page.
5 When you’ve finished, press the
[Setup] button.
Setup closes.
6.Audio Adjust
------------------------
1.Tone Control
2.PL x/Neo:6
3.Dolby Digital
4.LFE Level
5.Mono/Multiplex