Intel FB24624100 - Manual (Page 60)

mP4G/mP4GL Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 4•12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
mPGA478B
LAN Controller
JPSKMV1
JATXPWR1
JCFAN1
JP2
U23 JCOM2
JP1
JGAME1
JATXPWR2
FDD1
IDE1,2
JCMOS1
JPANEL1
JDIMMVOLT1
JUSB1
JUSB3
JUSBV1
JSFAN1,2 J1
JCDIN1
JAUX1
JAUDIO1
AGP1
PCI1
PCI2
PCI3
DDR1 DDR2
mP4G
CPU1
4. Insert the board in the housing and align the mount-
ing holes to the standoffs on the housing’s
motherboard mounting plate. Make sure all of the
rear I/O ports are properly aligned with the open-
ings in the I/O panel shield.
Mounting Holes
There are 6mounting holes
on the motherboard that
should correspond to
mounting standoffs on the
system housing’s mother-
board mounting plate.
Mounting holes
5. Attach the board to the housing by inserting mount-
ing screws in all the holes and tightening them
snugly.