Replacing a double key, Emoval, Removal – IBM 4685-K03 User Manual
Page 33
Advertising
_________________________________________________________________________________________
Replacing a double key
Removal
1. Pull off the key cap with the removal tool. (See
“Replacing a single key” on page 17.)
2. Pinch the key lightly with the removal tool, and
pull it out. Be careful not to bend the springs
attached to the key.
3. Remove the two rubber rings (black and brown).
4. Remove the key guide by using the opposite end
of the removal tool.
Removal tool
Key
Spring
Rubber rings
(Brown)
(Black)
Key guide
Chapter 4 Replacing the key 17
Advertising