IBM Partner Pavilion PROJECTOR M400 - Manual (Page 40)

3. Press the cursor up/down button to move up and down in the Info menu. The
Info menu is shown below.
The following table shows the options that you will see in the Info menu.
Item Description
Factory Default Change factory default message menu.
Lamp Timer Reset Reset the lamp timer.
Resolution Shows Resolution H/V format.
Frequency Shows Frequency H/V information.
Lamp Timer Shows lamp hours used information.
Version Shows Firmware version information.
Sub Menus
This section describes the different sub menus in depth.
White Balance
White Balance is a menu for calibration purposes. Follow the steps below to use
the White Balance menu.
1. Start by finding a black pattern source from the computer.
5-8 IBM M400 PROJECTOR: User’s Guide