InFocus IN3102 User Manual
Page 37
Advertising
36
4
Loosen the captive screws that attach the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5
Install the new lamp module and tighten the screws.
6
Replace the lamp door by sliding it into place.
7
Plug in the power cord and press the Power button to turn the projector
back on.
8
To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours (page 33).
loosen screw
Advertising