InFocus IN3102 - Manual (Page 32)

31
Setup menu
Language : allows you to select a language for the onscreen display.
Key Click : turns the key click sound on or off. When this setting is on,
pressing keys on the keypad causes the projector’s speaker to play a “click”
sound.
Custom Key
: allows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Highlight an effect and
press Select to choose a different one.
•
Source Info : the default action. Shows the Source Info menu.
• Projector Info : Shows the Projector Info menu.
• Aspect Ratio : toggles among 4:3, 16:9, and Native (see page 13 and
page 29).
• Auto Image : resets the projector to the source (page 25).
• Overscan : removes noise around the image.
• Blank Screen : displays an empty screen.
• Freeze Screen : pauses the projected image.
• Mute : turns off all sound.
• Source : cycles through available sources.
Blank Key : Select what to display when the blank key on the remote is
depressed: your custom snapshot, a solid color screen (blue, black or white),
the factory logo screen, a timer, or test patterns. The timer option is useful
for classroom tests or break times during meetings.
AC Power On : When this feature is on, the projector automatically turns on
when electrical power is connected. This allows control of ceiling mounted
projectors with a wall power switch.
Auto Off Time
: automatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received
before the projector powers down, the image will be displayed.
Screen Save Time
: automatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns
when an active source is detected or a remote or keypad button is pressed.
Lamp Low Power : toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter.
Power Sounds
: controls whether the projector makes a sound when powered
on and off.
Auto Source
: When this feature is On, the projector automatically finds the
active source, checking the selected Power-up Source first. When this
feature is Off, the projector defaults to the source selected in Power-up
Source. To display another source, you must manually select one by
pressing the Source button on the remote or keypad.
Power-up Source : determines which source the projector checks first for
active video during power-up.
HDMI DDC
: When this feature is set to On, the projector will support an
older DVD player for HDMI port.
Video Standard
: When this feature is set to Auto, the projector attempts to
automatically pick the video standard based on the input signal it receives.
(The video standard options may vary depending on your region of the
world.) If the projector is unable to detect the correct standard, the colors
may not look right or the image may appear “torn.” If this happens,
manually select a video standard by selecting NTSC, PAL, or SECAM from
the Video Standard menu.
Closed Captions
: controls closed caption display while audio is not muted. If
this setting is not off, and audio is not muted, and the source is NTSC and
Setup menu