Fine-tuning the image size and clarity, Correcting keystone, Fine-tuning the image size – InFocus IN100 User Manual
Page 26
Operation
26
Fine-tuning the image size and clarity
1.
Adjust the projected image to the size that you
need using the zoom ring.
2.
Then sharpen the image by rotating the focus
ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at
either the top or bottom. It occurs when the projector is not perpendicular to the
screen.
Besides adjusting the height of the projector, you may need to follow one of these
steps:
•
Using the remote control
Press
/
on the projector control panel or
remote control to display the Keystone
correction page. Press
to correct
keystoning at the top of the image. Press
to
correct keystoning at the bottom of the image.
•
Using the OSD menu
1.
Press
MENU/EXIT and then press
/
until the
DISPLAY
menu is highlighted.
2.
Press
to
highlight
Keystone and
press
MODE/ENTER. The Keystone
correction page displays.
3.
Press
to correct keystoning at the top
of the image or press
to correct
keystoning at the bottom of the image.
Press
/ .
Press
/ .