iHome IB969 - Manual (Page 11)

1.Make sure unit is connected to a working power source
2.Connect one end of a USB cable (two are included) to
either USB port on the bottom of the iB969 and the other
into the USB port on your device (see page 2 to match
cables with devices). If needed, use the included USB
converter tip to match your device’s port.
3.If needed, slide out the rubberized rest to fit your device.
4. Monitor your device’s battery indicator to confirm the
device is charging. If the device is NOT charging,
try moving the USB Mode Switch to a different posit-
ion. If the device still does not charge, try unplugging
the device from the USB port then reconnecting it
iB969
Using the
7
For E-readers, extend
sliding rubberized rest
Rest area for Blackberries
or other devices