Listening to the radio —continued – Integra DTR-8.8 User Manual
Page 71
71
Listening to the Radio
—Continued
Notes:
• RADIO ID cannot be selected in Category Search
mode. You must select Channel Search mode (see
right column).
• The following letters are not used in XM Satellite
Radio IDs: I, O, S, F.
• XM Satellite Radio will transmit a special signal to
your AV receiver to activate the full channel lineup.
Activation normally takes between 10 and 15 minutes,
but during busy peak periods, you may need to leave
the AV receiver turned on for up to an hour.
Selecting XM Radio Channels
There are three ways to select XM radio channels:
1.
Channel Search mode:
select any channel.
2.
Category Search mode:
select channels by cate-
gory.
3.
Direct tuning:
enter channel number.
Note:
You can’t select Channel Search mode or Category
Search mode while the Tuning Arrow
indicators
are flashing, as tuning is in progress.
■
Channel Search Mode
■
Category Search Mode
■
Direct Tuning
You can select an XM radio channel directly by entering
its number.
2
To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-438-9677
1
Press the [Receiver] Remote
Mode button, and then press the
[ENTER] button repeatedly to
select Channel Search mode.
2
Use the Up and Down [
]/[
]
buttons to select a channel.
You can also use the Left and Right
[
]/[
] buttons to select a category.
Enter
Receiver
Enter
Channel name
Channel number
1
Press the [Receiver] Remote
Mode button, and then press the
[Enter] button repeatedly to
select Category Search mode.
2
Use the Left and Right [
]/[
]
buttons to select a category, and
use the Up and Down [
]/[
]
buttons to select a channel in
that category.
1
Press the [Receiver] Remote
Mode button, followed by the
[D.TUN] button.
The [Receiver] button flashes.
2
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [Enter].
Note:
While the [Receiver] button is flashing,
you cannot select another input source
with the remote controller.
Enter
Receiver
Enter
Receiver
D.TUN
Clear
11
12
D.TUN
0
Clear
1
2
3
4
5
6
7
8
9
VCR/DVR
CBL/SAT
DVD
Tape
Tuner
Net/USB
CD
Game/TV
AUX 1
AUX 2