Insignia NS-BRDVD4-CA - Manual (Page 16)

16
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Connect a digital coaxial cable from the COAXIAL DIGITAL OUT
jack on the back of your player to the COAXIAL DIGITAL IN jack
on the receiver.
Connecting to the Internet
To connect to the Internet:
• Connect a network cable to the INTERNET jack on the back of
your player and into a wired router.
Using your player
Playing a Blu-ray Disc or DVD
To play a Blu-ray Disc or DVD:
1 Press .
2 Turn on the TV, then select the input setting on the TV that matches
the connection method you used to connect your player.
3 Press to open the disc tray.
4 Place a disc on the disc tray with the label facing up, then press to
close the disc tray. It may take a few seconds for the disc to load.
5 If a Blu-ray Disc or DVD menu opens, press or to select PLAY,
then press ENTER.
6 To eject the disc, press .
Note
Unless otherwise noted, all tasks in this section are based on
using the remote control.
Connect to the
OPTICAL DIGITAL
OUT jack
Back of player
Home theater system
Connect to the COAXIAL DIGITAL OUT jack
Network cable
Back of player
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 16 Friday, August 13, 2010 11:33 AM