Insignia NS-BRDVD4-CA - Manual (Page 48)

48
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
3 Press , press or to select Network Test, then press ENTER. A
dialog opens, showing the progress of the network test. The test
results appear shortly.
Upgrading your player’s firmware
We may occasionally offer upgrades to the player ’ s software. There are
three ways to update the player:
• Automatic upgrades over the Internet
• Upgrading the player software with a disc or USB stick
• Upgrading the player using a network connection
Upgrading the player using a network connection
If you are connected to the Internet, your player can automatically check
for software updates on the manufacturer’s website.
To upgrade the player’s firmware using a network connection:
1 If an update is available, a message similar to the following appears
whenever the Settings menu is selected on the player.
2 Press the red button to install the updates.
To automatically upgrade the firmware over the Internet:
• If you see the above message, and want to update your player’s
firmware, use the arrow keys to highlight OK, then press
ENTER. The software will begin downloading and a status bar
appears on the TV screen, similar to what is shown below:
• Once the update is complete, a message will appear indicating
that the player will turn itself off and on.
A software update for your player
is available, containing:
Various updates;
Press (red button) to install
these updates
Ok Cancel
Below, select OK to proceed with the update or Cancel to abort, then press the Enter key
Player model INSIGNIA NS-WBRDVD2 BD Player
Player current version: PKG_085
Update version: PKG_90
INSIGNIA NS-BRDVD4 BD PLAYER
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 48 Friday, August 13, 2010 11:33 AM