Iqua Snake 2 - Manual (Page 10)

9
If pairing fails, you will hear a sound and the lights will stop blinking. Repeat the above
procedures.
Disconnecting Snake 2 and your phone
To disconnect Snake 2 and the phone, do one of the following:
1. Switch off the Snake 2.
2. Disconnect Snake 2 in the phone menu.
3. Move the phone more than 10 meters away from Snake 2.
Reconnecting the paired Snake 2 with the phone
To reconnect Snake 2 to the last phone used, simply switch on Snake 2 and it will
automatically connect to the phone. Otherwise, make the connection in the phone menu as
instructed in the user guide of the phone.