Iqua Snake 2 - Manual (Page 8)

7
Getting Started
Installation
Attach Snake 2 to the headrest of your car seat
with the headrest installation piece and screws
as shown in the picture. Make sure that the
product is not in the operating area of any
possible side impact airbags or other safety or
operating equipment of your car. Also check
that the product does not interfere with you
operating the vehicle.
Charging the battery
Before using Snake 2, you must charge it for approximately 6 hours. When the battery is fully
charged, it provides up to 10 hours of talk time and up to 7 days of standby time.
1. Connect the charger cable to Snake 2.
2. Plug the car charger into the cigarette lighter. The red light will turn on.
3. When the battery is fully charged, the red light will turn off.