Setting up your gps, Charging the battery, Inserting an sd memory card – Insignia NS-NAV01 User Manual

Page 8: Charging the battery inserting an sd memory card

Advertising
background image

8

Insignia NS-NAV01 GPS

www.insigniaproducts.com

Setting up your GPS

Charging the battery

Your portable GPS comes with a built-in rechargeable battery. Charge the
battery fully before using your GPS for the first time. Charging time is
normally about three hours. A fully charged battery delivers about two
hours of use.

Inserting an SD memory card

Your GPS has a secure digital (SD) card slot.

To insert and remove an SD memory card:
1
Hold the memory card with the label facing the same direction as the

screen, contacts in, then carefully insert it into the SD card slot until it
clicks into place.

Caution

Always make sure that the GPS and any other external device
connected to the GPS are turned off and unplugged from the
power supply before you attempt to connect the GPS to any
external device.

Warnings

• The battery must be charged by using the supplied
adapters.
• The battery should only be used and charged when
temperatures are between 32°~100°F. Maintain
well-ventilated conditions around your GPS to avoid
overheating. Do not put the GPS on a bed, sofa, or anything
that may block ventilation to the product.
• When the battery is weak, a “low battery” symbol
appears on the LCD screen and the GPS automatically turns
off.

NS-NAV01_09-0445 ENG.fm Page 8 Tuesday, June 9, 2009 12:50 PM

Advertising