Insignia NS-NAV01 - Manual (Page 9)

9
Insignia NS-NAV01 GPS
www.insigniaproducts.com
2 To remove the card, carefully press the card in with your fingernail. The
card unlocks and protrudes slightly. You can now remove the card.
Mounting your GPS in a vehicle
When you use your GPS in a vehicle, you can use the supplied mounting
bracket and cradle.
To mount your GPS in a vehicle:
1 Slide the mount cradle onto the end of the mounting bracket to attach
it.
2 Set the bottom edge of your GPS onto the mount cradle, then push
the GPS into the tab (1) at the top of the mount cradle.
To remove the GPS, lift the tab (1) at the top of the mount cradle and
pull the GPS forward.
3 Lift the suction cup lever (2), then press the suction cup to the
windshield.
4 Press the suction cup lever toward the windshield to attach the
bracket to the windshield.
Note
The GPS software will not work unless the SD card is inserted.
NS-NAV01_09-0445 ENG.fm Page 9 Tuesday, June 9, 2009 12:50 PM