Invacare Van Seat PHWH93 - Manual (Page 13)

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Part No 1143195 13 Van Seat
SECTION 3—SAFETY INSPECTION/
TROUBLESHOOTING
NOTE: Every six months or as necessary take your wheelchair to a qualified dealer for a thorough
inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth
operation of your wheelchair. To operate properly and safely, your wheelchair must be cared for just
like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
NOTE: Refer to wheelchair base owner’s manual for additional safety inspection and
troubleshooting information.
Safety Inspection Checklists
CAUTION
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
Initial adjustments should be made to suit your personal body structure needs and
preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest pads sit flush against arm tubes.
❑ Ensure seat is secured to wheelchair frame.
❑ Ensure seat release latch is functional. Replace if necessary.
❑ Ensure all fasteners are secure.
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑ Ensure seat is secured to wheelchair frame.
❑ Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑ Ensure seat release latch is not worn and is functional. Replace if necessary.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.