Insignia NS-WBRDVD3 - Manual (Page 12)

8
NS-WBRDVD3 Wireless 3D Connected Blu-ray Disc Player
www.insigniaproducts.com
Wireless connection
Your player is equipped with a built-in IEEE 802.11n
wireless module, which also supports the
IEEE 802.11b/g standards. For the best wireless
performance, we recommend using an IEEE
802.11n certified Wi-Fi network (access point or
wireless router).
The network configuration and connection method
may vary depending on the equipment in use and
the network environment.
For instructions on configuring a wireless
connection, see “Configuring a wireless Internet
connection” on page 21.
Turning on your player for the first time
The first time you turn on your player, the Quick
Setup wizard opens automatically. You can use the
wizard to select initial settings for your player, such
as the menu language and video resolution.
To complete the Quick Setup wizard:
1 Make sure that the TV is connected to your
player.
2 Turn on the TV and your player. The Quick Setup
wizard opens.
3 Press ENTER, then follow the on-screen
instructions to complete the wizard. When the
wizard is complete, the following screen is
displayed.
Note
The Quick Setup wizard automatically selects the
most commonly used settings. If you are unsure
about a setting, use the setting selected by the Quick
Setup wizard.
NS-W BRDVD3 5V 500mA
Note
You can run the Quick Setup wizard again by selecting
QUICK SETUP on the HOME menu.
Quick Setup Page: 6/6
Quick Setup is completed!
Press ENTER to confirm your
settings and enjoy your player.
Any of these settings can be
adjusted later using the SETTINGS
menu.
ENTER Confirm Settings RETURN Previous