JVC XV-N512S - Manual (Page 14)

12
XV-N512S/GNT0055-003A/English
B
a
s
ic
p
la
y
b
a
c
k
3
Press ENTER.
The second page is shown, in which the pull-down menu of
the [MONITOR TYPE] is already open.
4
Press 5/∞ to select the desired monitor type.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].
For a wide-screen TV, select [16:9 NORMAL] or [16:9 AUTO].
(See page 34.)
5
Press ENTER.
The third page is shown, in which the pull-down menu of the
[ANALOG OUT] is already open.
6
Press 5/∞ to select a desired analog output
signal type.
Set this item correctly when you play back a DVD VIDEO disc
recorded with surround multichannel audio.
• When connecting to a surround decoder, select [2-CH
DOLBY SURROUND].
• When connecting to a stereo amplifier/receiver or TV, select
[2-CH STEREO].
• When connecting the player’s 5.1-channel output, select
[MULTI CHANNEL]. Note that you can perform fine tuning
for your speakers when [MULTI CHANNEL] is selected (see
page 36 and 37).
7
Press ENTER.
The final page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
8
Press
5/∞ to select a desired digital output
signal type.
Set this item correctly when you connect the player to an
external surround decoder or D/A converter. (If you do not
connect the player to such a device, you do not have to set
this item.)
• When connecting to other digital device, select [PCM
ONLY].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a Dolby Digital decoder or a DTS
decoder, select [STREAM/PCM].
9
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press SET UP for a few seconds until the DVD PLAYER SET UP
display appears.
Starting playback
1
Press
0 (or OPEN/CLOSE on the remote
control unit) to open the disc tray.
2
Place a disc in the disc tray.
738 0
3
(SELECT)
7
OPEN/CLOSE
ENTER
5/∞/2/3
SET UP
MENU
ON SCREEN
TOP MENU
8
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
MONITOR TYPE 4:3 L.B.
PICTURE SOURCE AUTO
SCREEN SAVER ON
MP3&WMA/JPEG
DVD PLAYER SET UP
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
MONITOR TYPE options
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
DIGITAL AUDIO OUTPUT STREAM/PCM
ANALOG OUT DOLBY PROLOGIC
D. RANGE CONTROL ON
DVD PLAYER SET UP
OUTPUT LEVEL
2-CH DOLBY SURROUND
2-CH STEREO
MULTI CHANNEL
ANALOG OUT options
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM
ANALOG OUT DOLBY PROLOGIC
D. RANGE CONTROL ON
OUTPUT LEVEL
DVD PLAYER SET UP
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DIGITAL AUDIO OUTPUT options
• To insert an 8-cm disc, place it in the inner recess.
With the label side up
XV-N512S(B).book Page 12 Monday, May 10, 2004 10:45 AM