JVC XV-N512S - Manual (Page 38)

36
XV-N512S/GNT0055-003A/English
C
h
a
n
g
in
g
t
h
e
i
n
it
ia
l
s
e
tt
in
g
s
SPK.SETTING menu
This menu can be selected only when [ANALOG OUT] in the
[AUDIO] preference display is set to [MULTI CHANNEL].
MODE
You can select the speaker configuration type according to your
speaker systems.
Setting options
5.1 CH., EXPERT
[5.1 CH.]: select when you connect the player to a 5.1-channel
amplifier and use the front, surround (rear), center and sub-
woofer speakers.
[EXPERT]: select when you want to make fine tuning to match
your speakers. The SIZE, DELAY, and LEVEL setting items are
available.
SIZE
You can set the speaker sizes according to your speakers.
See page 37 for how to set the speaker sizes.
DELAY
You can set the speaker delay time according to your speakers.
See page 37 for how to set the speaker delay time.
LEVEL
You can set the speaker output level according to your speakers.
See page 38 for how to set the speaker output level.
NOTE
If you connect the player’s digital output to an external Dolby
Digital or DTS decoder, and set [DIGITAL AUDIO OUTPUT] in
the [AUDIO] preference display to [STREAM/PCM], the above
settings are not effective.
Make the speaker settings of the external decoder properly.
OTHERS menu
RESUME
You can select the resume playback mode.
See page 14 for details about the resume playback function.
Setting options
ON, OFF, DISC RESUME
[ON]: when selected, the player can resume playback of the disc
from the position where playback was last interrupted, if the
disc is still in the disc tray.
[OFF]: when selected, the resume function is deactivated.
[DISC RESUME]: when selected, the player can resume
playback of the last 30 discs played. The player retains a
memory of the interrupted positions of the last 30 discs played,
even though they have been removed from the disc tray.
ON SCREEN GUIDE
The player can display “on-screen guide” icons or characters on
the picture, which show what is happening to the disc or the
player.
Example of “on-screen guide” icons: , ,
Setting options
ON, OFF
[ON]: when selected, the on-screen guide is activated.
AUTO STANDBY
When the player is stopped for more than 30 minutes or 60
minutes, the player enters standby mode automatically.
Setting options
60, 30, OFF
AV COMPULINK MODE
This item is provided for use in the future. Leave it as the default
setting (“DVD 1”).
PARENTAL LOCK
When this option is selected, pressing ENTER on the remote
control unit brings up the [PARENTAL LOCK] display shown
below. This allows you to restrict children from playing DVD
VIDEO discs.
• See page 39 for details about the parental lock setting.
SELECT
ENTER
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
SET LEVEL NONE
PASSWORD _ _ _ _
PARENTAL LOCK
EXIT
COUNTRY CODE GB
XV-N512S(B).book Page 36 Monday, May 10, 2004 10:45 AM