Janome MEMORY CRAFT 4900 QC - Manual (Page 30)

2 8
1.0 5.0
7.0 3.5 0.0
Adjusting the needle drop position
The needle drop position can be altered by pressing the
stitch width adjustment button.
Press the right side of the button (+ sign) to move the
needle bar to the right.
Press the left side of the button (– sign) to move the needle
bar to the left.
Adjusting the stitch length
The stitch length can be altered by pressing the stitch length
adjustment button.
The stitch length indication will change as the button is
pressed.
Press the right side of the button (+ sign) to increase the
stitch length.
Press the left side of the button (- sign) to decrease the
stitch length.