Janome MEMORY CRAFT 4900 QC - Manual (Page 59)

5 7
To sew
q Quilter screw
w Hole
e Quilting bar
r Width of quilting stitch
Loosen the quilter screw q on the back of the presser foot
as shown.
Slide the quilting bar e into the hole w under the screw to
the width of quilting stitches you desire.
Tighten the screw q .
Sew guiding the quilter over the previous row of stitching.
DECORATIVE STITCHES
Pintucking
Machine settings
q Pattern: 2 (mode 1)
w Presser foot: Blind hem foot G
e Thread tension: AUTO
Fold a fabric with the right side together.
Place the folded fabric under the blind hem foot.
Align the edge of the fold with the guide on the foot, and
lower the foot.
Sew while guiding the edge of the fold along the guide.
Open the fabric and press the tuck to one side.
1
2
q w e
q w e
Quilting
Machine settings
q Pattern: 1 (mode 1)
w Presser foot: Zigzag foot A
e Thread tension: AUTO
q
w
e
r