Jura Capresso IMPRESSA S90 User Manual
Page 14
14
13.2 Programming coffee temperature
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ Now press the key that you want to programme.
Ⅲ Select the required temperature (high or normal) by activating
key or .
Ⅲ To store the new coffee temperature in memory briefly press key
.
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.3 Programming water quantity
Ⅲ
WATER QUANTITY / SELECT KEY
Ⅲ Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
Ⅲ
The selected value is confirmed
Ⅲ Now your machine prepares a coffee.
Ⅲ
ENOUGH COFFEE? / PRESS KEY
Ⅲ
OK?
·········· II ··········
Ⅲ When the required water quantity is reached press key . You
can call up the next setting by pressing key
.
Ⅲ There is an additional possibility to alter the water quantity
anew. Press key
or
for this purpose.
Ⅲ If you wish to draw another coffee to control the water quantity,
press key again otherwise press key
briefly to store water
quantity in memory.
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
N
+
P
-
+
+
P
+
-
P
P
N
+
P
-
+
13.4 Programming steam portion
Ⅲ
STEAM PORTION
Ⅲ Press key .
Ⅲ
PORTION /....20 SEC.
Ⅲ By pressing key
or
you can programme time in seconds
(drawing off time of 3 – 250 sec.)
Ⅲ Press key .
Ⅲ
STEAM PORTION
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.5 Programming tea portion
Ⅲ Place a cup under the height-adjustable tea-spout (22).
Ⅲ Press key .
Ⅲ
OPEN TAP
Ⅲ
ENOUGH TEA? / CLOSE TAP
Ⅲ
TEA PORTION
Ⅲ The required portion of tea-water is programmed now.
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.6 Programming Filter
Please read chapter 7.1 “Placing filter“.
13.7 Programming water hardness
(only with setting Filter no)
Ⅲ
HARDNESS LEVEL 3
Ⅲ Press key
Ⅲ By pressing key
or
briefly you can programme the water
hardness level.
-
+
P
N
+
P
N
+
P
-
+
P