Jura Capresso IMPRESSA S90 - Manual (Page 19)

19
Ⅲ Open cover (3).
Ⅲ Press key until you can hear an acoustic signal.
Ⅲ
EMPTY TRAY
Ⅲ AGENT IN TANK
Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank.
Ⅲ AGENT IN TANK / OPEN TAP / PRESS CALC
Place a sufficiently large container under the pivoting nozzle
(20). Remove the Auto-Cappuccino.
Ⅲ Turn selector switch for coffee (19) to the symbol and press
key .
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).
Ⅲ PRESS CALC
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ CLOSE TAP
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ Inside the machine the decalcifying agent is conducted to the
drip tray.
Ⅲ EMPTY TRAY
Ⅲ FILL WATER
Ⅲ Place a container under the pivoting nozzle (20).
Ⅲ
OPEN TAP
Ⅲ PRESS CALC
Ⅲ UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Place a container under the height-adjustable tea-spout (22).
Ⅲ
PRESS CALC
E
Ⅲ UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ CLOSE TAP
Ⅲ UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Inside the machine the water is conducted to the drip tray.
Ⅲ
CLEAN CONTACTS / EMPTY TRAY
(please refer to chapter 14.8)
Ⅲ PLEASE WAIT
Ⅲ RINSE UNIT
Ⅲ UNIT RINSING
Ⅲ COFFEE READY
17. Disposal
For correct disposal, you should return your coffee machine to your
dealer, Jura service centre or Jura Elektroapparate AG.
18. Tips for a perfect coffee
Height adjustable coffee-spout
You can adjust the height of the coffee-spout to the size of your
cups.
Grinding
Please refer to chapter 3.4 “Adjusting grinder“.
Pre-warm cups
You should warm cups in advance with hot water or steam. The
smaller the quantity of coffee, the more important warming the
cups is.
Sugar and cream
Warmth is lost by stirring the contents of the cup. Adding milk or
cream from the refrigerator considerably lowers the temperature of
the coffee.