Jumpking OR1213 - Manual (Page 17)

17
4
4. Lay the Frame Pad (9) on the frame.
Do not use the trampoline without the
Frame Pad (9), which is designed to reduce the
likelihood of injury to the user from coming in con-
tact with the trampoline frame. If you do not
have a Frame Pad, call our Customer Hot Line
toll-free at 877-927-8777, Monday-Friday,8 a.m.
-5 p.m. Central Time.(Excluding Holidays)
Properly install the Frame Pad before using the
trampoline.
Thread one end of Elastic Tie-Down, then tie a knot
on V-Ring.
Repeat this step with the remaining straps which at
middle position of each pad section (not shown).
5
A B C
Frame Pad Frame Pad
Frame Pad
Top tube
Top tube
Top tube
Webbing
Webbing Webbing
D-ring D-ring
D-ring
Look under the trampoline and locate the pairs
of straps near the edge of bed(8) and Double
D-ring and webbing near the frame.
See the inset drawing. A, B and C. Repeat this
step with the remaining straps (not shown).
5.
Strap with Double D-ring on the pad edge
Safety pad
D-ring
T-connector Webbing
Webbing