JVC DR-MH200SE - Manual (Page 17)

Masterpage:Right0
EN
17
Filename [MH200SEU_05Name.fm]
Page 17 Wednesday, 25 May 2005 13:34
INITIAL SETTINGS
Auto Channel Set/Auto Clock Set/Auto Guide
Programme Number Set
1
Press A on the unit or DVD A on the remote control to turn
on the unit. The Country Set display appears on the TV screen.
2
Press selection keys
to select your country’s
name, then press
ENTER.
NOTES:
● If you have selected
ABELGIUMB or ASUISSEB,
go to step 3.
● If you have selected
AMAGYARORSZÁGB,
AČESKÁ REPUBLIKAB,
APOLSKAB or AOTHER EASTERNB, press ENTER. The Clock Set
screen appears. Set the clock manually (A pg. 77), then go to
step 4.
● If you have selected any other country name, go to step 4.
3
Press selection keys to
select the language of
your choice, then press
ENTER. The AUTO SET/
T-V LINK display appears
on the TV screen.
4
Press selection keys to
select
AAUTO SETB, then
press ENTER. The AUTO
SET screen will appear.
● When AUTO SET is
completed,
ASCAN
COMPLETED B appears on
the TV screen. Select
AOKB.
ATTENTION:
AAUTOB blinks on the front display panel; do NOT press any button
on the unit or remote control until the front display panel shows
A– –:– –B as illustrated on page 19.
● When you have connected the unit to a TV offering T-V Link via a
fully-wired 21-pin SCART cable (A pg. 16) and the TV is turned
on, the unit automatically performs the Preset Download
(A pg. 18) even if you select
AAUTO SETB for Auto Set Up
function.
NOTES:
● In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
● If there is a power cut, or if you press A or SET UP while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure to
turn off the unit power once and try again from step 1.
● Auto Clock Set may not function properly depending on the
reception condition.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (A pg. 76,
AINFORMATIONB)
Auto Set Up
After the A button on the unit (or DVD A on the remote
control) is pressed for the first time to turn on the unit, by simply
selecting your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Programme numbers automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
* If you live in Hungary (MAGYARORSZÁG), Czech Republic (ČESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN), set the clock manually.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the unit.
● The unit’s mains power cord should be connected to a mains
outlet.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
FGDE
DVD A
ENTER
CABLE/SAT
DVD TV
1
Selection Keys
INITIAL SET UP > AREA SELECT
BELGIUM ČESKÁ REPUBLIKA DANMARK
DEUTSCHLAND ESPAÑA GREECE
ITALIA MAGYARORSZÁG NEDERLAND
NORGE ÖSTERREICH POLSKA
PORTUGAL SUISSE SUOMI
SVERIGE OTHER WESTERN OTHER EASTERN
RETURN
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
ATTENTION:
Once you have performed Auto Set Up, even if the unit’s
memory backup has expired, all the stored stations and their
Guide Programme numbers remain in the unit’s memory and the
unit will not perform Auto Set Up again. The unit only performs
Auto Clock Set when the unit is turned on.
If you have moved to a different area, perform each setting as
required.
● Tuner setting (A pg. 74)
● Clock setting (A pg. 77)
If a new station starts broadcasting in your area, perform tuner
setting. (A pg. 74)
After AAuto Set UpB is completed, perform AMonitor SetB on
page 21.
INITIAL SET UP > LANGUAGE SELECT
ENGLISH DEUTSCH FRANCAIS
ITALIANO ESPAÑOL NEDERLANDS
SVENSKA NORSK SUOMI
DANSK
RETURN
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
INITIAL SET UP > AUTO CH SET
AUTO SET T-V LINK
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
MH200SEU_00.book Page 17 Wednesday, May 25, 2005 1:34 PM