JVC DR-MH200SE - Manual (Page 73)

Masterpage:Right+
EN
73
Filename [MH200SEU_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 73Wednesday, 25 May 2005 13:34
Guide Programme Number Set
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys
to select
ATUNER SETB,
then press G.
4
Press selection keys
to select
AGUIDE
PROG SET B, then
press ENTER.
5
Press selection keys
to select
AGUIDE
PROG B, then press
ENTER.
6
Press selection keys
to select the Guide
Programme number for
the desired station as
shown in the TV
listings. Then press
ENTER.
7
Press selection keys to select ATV PROGB, then press ENTER.
Press selection keys to select the number of the unit’s channel
position on which the Guide Programme number’s broadcast is
received by the unit or the satellite receiver. Then press
ENTER.
● Pressing AUX changes ATV PROGB to ASATB.
● To timer record a satellite programme with the S HOW V IEW
system, you need to install the provided Satellite Controller and
perform the procedure described in
ASatellite Receiver Control
Setting B (A pg. 22).
● Repeat steps 5 – 7 as necessary.
8
Press SET UP to complete the setting.
S
HOW
V
IEW
System Setup
IMPORTANT:
Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18)
or Auto Channel Set (A pg. 74) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
● When timer programming with the S HOW V IEW system, the
channel position, where the station you wish to record is
received on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
^ Set the Guide Programme number for that station manually.
● When you wish to timer record a satellite programme with the
S
HOW V IEW system,
^ Set the Guide Programme numbers for all satellite
broadcasts received on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
AUX
SET UP
FGDE
CABLE/SAT
DVD TV
Selection Keys
Guide Programme Number
AGuide Programme (GUIDE PROG) numberB refers to the
assigned TV station numbers, according to broadcast area, for
the S
HOW V IEW timer recording. The Guide Programme Numbers
can be found in most TV listings.
13 12
11
AUTO CH SET MANUAL CH SET
SAT CONTROL SET GUIDE PROG SET
TUNER SET CLOCK SET
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
13 12 11
YLE2 1
1
INITIAL SET UP > GUIDE PROG SET
RETURN
TV PROG
GUIDE PROG
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
MH200SEU_00.book Page 73 Wednesday, May 25, 2005 1:34 PM