Jensen SMPV-xGBTA - Manual (Page 16)

Language
- To select language of the menu.
Display
1. Brightness
- To set display backlight dimmer.
- 4 different settings: Low, Medium, High and Maximum
2. Backlight
- To set backlight turn off timer for battery saving.
- 4 different settings: 15seconds, 30 seconds, 1 Minute and Close. The screen will be turned off when
selected time expires.
- Select Close to disable the backlight timer.
Record
To set voice record mode, 3 settings Quality, VAD and AGC are available.
1. Quality
- 3 selections available: Long Time, Normal Quality and High Quality
2. VAD
VAD: Record according to the voice. If no voice is heard then recording will stop automatically.
In this setting, you can turn on VAD function or turn off this function by selecting On or Off in its
sub-menu.
3. AGC
AGC: This function determines the volume of the MIC and can prevent voice distortion if you are
recording something loud, it can also prevent recording low unwanted sounds.
In this setting, you can turn on AGC function or turn off this function by selecting On or Off in its
sub-menu.
System Tools
1. Delete – To delete the file.
2. Format – To format the player. Two selections Quick and Complete are available.
3. Reset – To reset the unit to ex-factory setting
1). Tap the M Button to enter.
2). Tap the / Button to select “Yes” or “No”.
3). Tap the M Button to confirm selection to reset device to factory default settings.
4. System information - Display the system information of the player.
5. Refresh - Refresh the player
15