JVC LVT1627-001A - Manual (Page 179)

53
FM1 Preset4 Classic
Station name
92.5 MHz
10:35 AM 80 km/h
P T Y
FM1 Preset4 Classic
Station name
92.5 MHz
10:35 AM 80 km/h
P T Y
Listening to the radio
Selecting preset stations
On the remote:
1
2
Select a preset number.
From the Preset List
1
Display the Preset List.
• For FM only: Each time you press and
hold the button, you can change the
bands.
2
Select a preset number.
4
Select a preset number.
You can also access the Preset List through
AV Menu
] List.
FM1 Preset Store
1 87.5 MHz
2 88.3 MHz
3 88.7 MHz
4 91.5 MHz
5 93.1 MHz
6 95.3 MHz
[Hold]
Tuning in to stations with sufficient
signal strength
This function works only for FM bands.
Once you have activated this function (selected
Local), it always works when searching for FM
stations.
1
2
AV Menu
]Mode
]DX/Local
]Local
3
lights up. Only stations with sufficient
signal strength will be detected.
To tune in to all receivable stations again,
select DX in step
2 .
When an FM stereo broadcast is hard
to receive
1
2
AV Menu
]Mode
]Mono
]On
3
lights up. Reception improves, but stereo
effect will be lost.
To restore stereo effect, select Off in step
2 .
[Hold]
or
KDNX5000_E_eng.indb 53 KDNX5000_E_eng.indb 53 14/2/07 9:59:13 pm 14/2/07 9:59:13 pm