Jacuzzi LCD Series - Manual (Page 21)

customize the massage and performance by diverting water
between various jet systems. Simply turn diverter to position
A (Combo), B, or C to divert water pressure to various jet
groups. Note: The diverter valve(s) is designed to operate in
positions A (Combo), B, and C for optimum performance. It
is considered normal for sound levels within the valve to vary between posi-
tions due to the large amounts of water flowing through it! For optimum fil-
tration benefits, leave the valve in position A when spa is covered. Select
position B or C for maximum jet performance during spa use.
9.7 Adjusting Individual Jet Flow
The water flow to the individual jets in your spa
can be increased or decreased by rotating the outside
jet face (Except Maxx PowerPro Jets). Note: Always
keep at least 6 adjustable jets open at all times.
9.8 Adjusting PowerPro Jets
With the nozzles of the PowerPro Jets positioned straight
ahead, the jet stream will be stationary. Pushing the nozzle to
one side causes the jet nozzle to rotate, moving the jet stream
in a circular pattern.
9.9 Waterfall Feature
The waterfall feature allows you to independently control it for a customized
soothing effect. The JETS 1 button activates the waterfall feature. Then,
each fall is individually adjusted moving the control lever next to it forward or
backwards. To turn on, move lever inward. To turn off, move lever outward.
9.10 Air Controls
Certain jet systems have their own “push-button” air control.
Each control introduces air into the water lines that supply that
specific jet group. Simply press any air control button (once) to
open; then press a second time to close. To minimize heat loss,
all air controls should be closed when the spa is not in use.
9.11 Optional Jacuzzi Premium Audio System
Spas equipped with the optional Jacuzzi Premium Stereo
System offer enhanced spa enjoyment. These models include
an integrated AM/FM/CD receiver with two high-quality
marine speakers for unsurpassed sound quality and long-life.
Both speakers located on spa corners (Sec. 8.3, page 14) are designed for
manual exposure and retraction. To expose each speaker for audio, squeeze
Page 17
C B
A