Jacuzzi LCD Series - Manual (Page 34)

11.4 Locking Filter Cycles
You may keep the filter cycle programs from being inadvertently
altered by electronically “locking” them. To accomplish this, simply
press CYCLE then, within 30 seconds, press DISPLAY, MODE and
WARMER ( + ), within five seconds each.
A padlock symbol will appear on the screen. In this state, the status of the
cycle programming may be checked, but may not be altered. To unlock the
filter cycle programming to make changes, simply press DISPLAY, MODE
and COOLER ( - ) within five seconds each.
11.5 Panel Lock
To help prevent unauthorized use of your spa, the Sentry controls
incorporate a unique panel locking system which disables the con-
trols on the panel.
To Lock The Panel: Press the DISPLAY, MODE, and WARMER ( + ) sensor
pads, in order, within five seconds. A padlock symbol will appear on the LCD
screen. With the panel locked, none of the components can be turned on
and the only settings that can be adjusted are the standard/economy oper-
ating mode and changing the time of day. All automatic spa functions will
operate normally.
To Unlock The Panel: Press DISPLAY, MODE, and COOLER ( - ), in order,
within five seconds. The “lock” symbol will disappear. All sensor pads are now
active.
11.6 Temperature Setting Lock
To electronically lock the temperature setting, first enter the “temperature set-
ting” mode by pressing WARMER ( + ) or COOLER ( - ). Then, within five
seconds, press the three sensors described under “Panel Lock” above. This
will prevent the temperature setting from being changed by unauthorized per-
sons but all other sensors will remain active.
To unlock the temperature setting so that it can be adjusted, simply follow the
instructions above under “To Unlock The Panel.”
12.0 Spa Maintenance
Proper and regular maintenance of your spa will help it retain its beauty and
performance. Your authorized Jacuzzi Premium dealer can supply you with all
Page 30
LOCKED
LOCKED