JVC LET0079-001A - Manual (Page 14)

Page 11
English
VARIOUS UNIQUE FUNCTIONS
Viewing the VIDEO INTRO of a video CD
Preparation
When you play a video CD with the Playback Control function, the
mode switch is recommended to be in the PBC OFF mode or KARAOKE
mode.
Operation
1. Play the disc you want to see a digest of.
2. Press the VIDEO INTRO button on the Player or the remote
control just after starting disc play. Then the Player starts to
display in sequence the first five (5) seconds and track num-
bers of all tracks on the disc.
Viewing the highlights of a video CD
This function is used for a movie video CD.
Preparations
•
When you play a video CD with the Playback Control function, the
mode switch is recommended to be in the PBC OFF mode or
KARAOKE mode.
• This function is controlled by the remote control unit.
Operation
1. Start playing the track you want to see the highlights of.
2. After the track begins to play, press the HIGHLIGHT button on
the remote control.
1 2 3
HIGH LIGHT
4 5 6
7 8 9
(Television screen)
(Remote control)
HIGHLIGHT
3. To select one of the nine (9) segments, press the number key
(1 to 9) of the segment which you want to play.
Notes
•
When you choose a highlight it will start from five (5) seconds before
the shown time below each segment.
• The highlights show the proceeding five (5) seconds up to the
displayed time on each highlight.
• The segments are each of nine (9) equal-time period divisions of the
track.
• Nine (9) different highlights are displayed for one (1) minute.
• If no highlight is choosen in the one (1) minute period in normal
mode or PBC OFF mode the next nine (9) segment highlights will
begin, in KARAOKE mode highlights will stop.
• While in VIDEO INTRO or HIGHLIGHT, sometimes image is
garbled partially. This symptom is caused by noise in the disc itself
or incorrect manufacturing, it is not caused by a malfunction of the
Player.
VIDEO
INTRO
(Remote control)
VIDEO
INTRO
or
3. To select a track during digest display, press the number key
corresponding to the item number on the television screen.
1 2 3
VIDEO INTRO
4 5 6
7 8 9
(Television screen)
Programming during VIDEO INTRO
Operation
1. Stop play.
2. Press the PROGRAM button so that PROGRAM is lit in the
display.
3. Press the disc button you want to play, and enter 1 on the
keypad.
4. Press the 3 3 3 3 3 button and then, after the disc has started to play,
press the VIDEO INTRO button.
5. The Player starts to display in sequence the first five (5)
seconds and track numbers of all tracks on the disc. Select the
number you want to program. You can program nine (9) tracks.
6. Press the 3 3 3 3 3 button to play.
XL-MV338BK 97.8.1, 4:58 PM 11