JVC LET0079-001A - Manual (Page 17)

Page 14
OPERATION OF PLAYBACK CONTROL FUNCTION
This Player provides a Playback Control function which utilizes a
procedure (menu selection) programmed in a video CD. The playback
operation procedure may differ depending on the disc you use.
The Playback Control function is described below and in the figure.
•
High-resolution still image display - Super-fine reproduction of still
images with more than 4 times the resolution of video tape.
• Menu-driven playback - interactive menus for easy selection of
tracks
Preparations
•
A video CD with the Playback Control function is required for this
operation.
• Only the NORMAL mode can be used.
• The buttons available for use are the number keys, the 4 / ¢
PREV/NEXT buttons, 3 SELECT button, DISC (1 through 3)
buttons, and RETURN button.
Button functions
Number keys ............................ Select a specific menu item from the
(Including +20 button and
television screen or monitor.
+10 button)
4 / ¢ PREV/NEXT buttons .. Move through menu.
3 SELECT button .................... Starts up a video CD with the PBC
function in DISC tray 1 to 3.
DISC (1 through 3) buttons ....... Start up a video CD with the PBC
function in the specified DISC tray.
RETURN button ................ Returns to the menu.
Playing Video CDs with
Playback Control function
Operation
1. Verify that the Player is in NORMAL mode.
2. Press the DISC (1 through 3) or
3 3 3 3 3 SELECT button, and then the
Player starts up the PBC function. “Pb” is shown in the Display
window. The main menu, “PBC”, and disc/track number are
displayed on the television screen.
or
SELECT
1
2
3
4
2-PBC PBC
(Television screen)
3. To move through the menus, press the 4 4 4 4 4 / ¢ ¢ ¢ ¢ ¢ PREV/NEXT
buttons.
NEXT PREV
4. When the menu you want appears, select an item in the menu
by using the number keys. The numbers on the number keys
correspond to the menu item numbers.
5. To return to a menu and stop the track being played, press the
RETURN button.
RETURN
Notes
•
Page numbers in the menu show that preceding pages exist. To
move from the current menu, press the
4 / ¢ PREV/NEXT
buttons.
• If you have no desire to use the PBC function when playing a disc
with the PBC function, switch the MODE switch to “PBC OFF”
before playing.
• When you change the mode switch except NORMAL mode during
play Playback Control disc, the play stops, so reset again from the
beginning.
• If you press number keys directly to select the track, you can’t enter
the Player into PBC mode.
XL-MV338BK 97.8.1, 4:59 PM 14