JVC XV-D2000BK - Manual (Page 14)

12
XV-D2000BK
LET0091-001A
Before Using for the First Time
7 Connecting with an audio equipment with digital input
By connecting the player’s DIGITAL OUT (coaxial or optical) with the digital input
of an amplifier, DAT or MD using a digital cable, the digital stereo audio signal in
a disc is directly transferred.
AV COMPU LINK DIGITAL OUT
PCM/DOLBY DIGITAL
OPTICAL COAXIAL
AUDIO OUT
CENTER SUBWOOFER
NORMAL RIGHT LEFT
REAR FRONT
RIGHT LEFT RIGHT LEFT
OFF ON
ATTENUATOR 2CH
VIDEO S-VIDEO
GAIN PLUS
VIDEO OUT
1
XV-D2000BK
MD Player
To digital input
Optical
digital
cable
Coaxial
cable
or
Note: • Before actual usage, set “DIGITAL AUDIO OUTPUT” in the “PREFERENCE”
display to “PCM ONLY,” otherwise, playing back a Dolby Digital encoded
DVD may generate noise and, in the worse case, damage your speakers.
See “Preference via "PREFERENCE" on-screen display” on pages 53.
• Set “DOWN MIX” setting in the DVD on-screen display to “L0/R0” or “Lt/
Rt”. (See “Down Mix” on page 33.)
XV-2000BK/1E 9/24/97, 1:11 PM 12