JVC XV-D2000BK - Manual (Page 57)

55
XV-D2000BK
LET0091-001A
Selecting Preferences
MONITOR TYPE
You can select a monitor type when you playback DVD discs recorded for wide
screen televisions.
If your television has a normal (4:3) screen, select “4:3 PS ” (cuts both sides of
the “wide” picture) or “4:3 LB ” (with masking bars to maintain the “wide”
aspect ratio).
[on DVD disc]
[4:3 (normal) television screen]
[16:9 wide television screen]
converted and output
squeezed recording
letter box conversion
pan scan conversion
If your television has a wide (16:9) screen, you have to select “16:9 WIDE”.
AV COMPULINK MODE
If you use the AV Compulink system, you must set this item correctly.
Select from the three options: DVD1, DVD2 and DVD3 according to the equipment
to be connected.
See “AV Compulink remote control system” on pages 62.
DIGITAL AUDIO OUTPUT
To connect the player‘s digital output with an external amplifier or receiver
equipped with a digital input, this item must be set correctly.
PCM ONLY: to connect to a PCM digital input of a piece of audio
equipment.
PCM/AC-3: to connect to a Dolby digital input of a Dolby Digital decoder
or an amplifier with built-in Dolby Digital decoder.
The following chart shows the relationship between kinds of playback discs and
output signals.
Playback discs Output Output
(PCM/AC-3 mode) (PCM ONLY
mode)
DVD with 48-kHz, 16-bit linear PCM 48-kHz, 16-bit linear PCM ←
DVD with 48-kHz, 20/24-bit linear PCM 48-kHz, 20-bit linear PCM
←
DVD with 96-kHz, linear PCM no output ←
DVD with Dolby Digital Dolby Digital bitstream 48-kHz,
16-bit
linear
PCM
DVD with MPEG audio 48-kHz, 16-bit linear PCM ←
CD 44.1-kHz, 16-bit linear PCM
←
Video CD 44.1-kHz, 16-bit linear PCM
←
XV-2000BK/3E 9/24/97, 1:32 PM 55