Jensen Hello Kitty KT7009A - Manual (Page 21)

21
Apply “Fluorescent 1” under traditional fluorescent lamp.
Apply “Fluorescent 2” under high intensity fluorescent lamp.
Apply “AWB” for auto white balance setting or when you are not sure what is the best option to set.
Setting Single / Multiple Snapshot
The shutter button can act as a normal shutter for single picture shooting. This camera also supports
multiple shooting by a single shutter key press.
Single Snapshot
Burst Snapshot
Turn on the camera and make sure it is in Capture mode.
Press “Menu” button and use “up”/ “down” button till the cursor on “Burst Snapshot” in the menu on the
LCD Screen, then use “Left” and “Right” to choose between “Single” or “Burst” snapshot.
The multiple snapshot operates with 3 picture capturing sequentially. It supports only with 800x600
resolution picture.
Setting Self-timer
Your camera is designed with a self-timer function, which allows you to take pictures with built-in timer.
Turn on the camera and make sure it is in Capture mode.
Press “Menu” button and use “up”/ “down” button till the cursor on “Self timer” in the menu on the LCD
Screen, then use “Left” and “Right” to choose self-timer interval setting of “OFF”, “10 sec”, “15 sec” or “20
sec”.
Press “Menu” button again to exit menu setting. Next time while taking a picture, the camera will count