Operation – Jacuzzi SteamPro User Manual

Page 16

Advertising
background image

OPERATION

C. DIGITAL TIME AND TEMPERATURE CONTROL

The digital control features an adjustable 60 minute time and temperature
control with digital display. The actual room temperature and time remaining
are alternately displayed every 5 seconds. The primary control can be
mounted either inside or outside the steam room and an optional secondary
control is available to mount in an alternate location. The temperature can
be adjusted in a range between 100 degrees and 125 degrees Fahrenheit
with an initial default of 120 degrees. Once the set temperature is reached
the ''soft steam'' feature automatically engages cutting steam production
back to a single element to provide softer billowing steam during more of
the steam bath. If the steam room temperature drops more than 5 degrees
both elements will automatically engage.

Operation of Your Digital Time and Temperature Control

1. Be sure the power circuit and water supply to the generator are on.
2. Press the ON/OFF button on the control until the temperature is displayed.
3. The generator should produce steam in 5 to 10 minutes and will turn off automatically in 60 minutes or less

depending on the set time. The control will alternately display time remaining and the actual temperature at
the sensor in your steam room every 5 seconds.

4. To change the time setting press and hold the TIME button on the control. Continuing to hold the button will

cause the time to increase in 5 minute increments from the prior setting. At 60 minutes the time setting will
scroll backwards to 5 minutes. To shut down the generator press the ON/OFF button.

5. To change the preset temperature setting press and hold the TEMP button on the control. While continuing to

hold the button, the temperature display will increase in 1 degree increments from the prior setting to 125
degrees Fahrenheit. At 125 degrees Fahrenheit the temperature setting will decrease in 1 degree increment to
the lowest setting, 100 degrees Fahrenheit.

6. The TIME and TEMP set points are remembered for your next bath unless power to the steam generator is lost.

14

Advertising