Jacuzzi SteamPro - Manual (Page 8)

INSTALLATION
Steam Head Installation for Various Wall Surfaces
Jacuzzi Whirlpool Bath recommends that the steam shield be used for all steam head installations. The steam shield
must be installed if the steam head is located on acrylic (or other plastic) wall surfaces or above a bath rim. The steam
head is to be installed at 18 inches minimum height above the floor or shower base.
The steam head is to be installed at 10 inches minimum above a bath rim.
Caution: Consult the manufacturer of the enclosure, shower, or bath unit to verify the suitability of the material for
use with steam.
6