Jensen JMC-1000 - Manual (Page 17)

16
PROGRAMMED CD PLAYBACK
You can program the CD changer to play up to a total of 32 tracks on all 3 discs in
any desired order.
NOTE: You can not program the CD changer during playback. If a disc is
playing press the STOP button first and then follow the instructions.
1.) Press the PROGRAM button once. The PROGRAM, EDIT indicators, program
# 01, disc # 01 appears in the display.
2.) Press the DISC SKIP button or one of the three DISC buttons to select the
disc which contains the first track you wish to program. Example: Disc 2.
3.) Press the or buttons to select the first track you wish to program. m.
Example: Track 8.
4.) Press the PROGRAM button again to store the desired disc and track number
into memory location Number 1. The display will change from Program Number
01 to Program Number 02 .
MS9903TT_ib080503.p65 5/8/2003, 11:44 15