Jensen JMC-1000 - Manual (Page 25)

24
Pause Control
Press the key to stop the tape temporarily. The tape movement stops but the
tape motors continue to run. Press the key again to cancel pause mode and
resume normal playback.
CONTINUOUS PLAYBACK OF TWO CASSETTES
1.) Insert prerecorded tapes into both cassette compartments with the tape you
want to play first in DECK B.
2.) Press the Play key of DECK B to begin playback.
3.) Press Pause key and then Play key of DECK A. A.
4.) When the tape in DECK B ends, it stops and the Pause key of DECK A will
be released automatically to begin playback on DECK A.
MS9903TT_ib080503.p65 5/8/2003, 11:44 23
NOTE: Continuous playback no function if you play the tape in DECK A first.