S-video connection (dvd deck only), Pg. 13, Only) – JVC HR-XVC27UM User Manual

Page 13: Pg. 13, 14), S-video connection, Dvd deck only)

Advertising
background image

Masterpage:Right-No-Heading

EN

13

Filename [XVC27UM_06Index.fm]

Page 13

14 June 2004 4:20 pm

S-VIDEO

Connection

(DVD deck only)

8 To connect to a TV with S-VIDEO/AUDIO input

connectors . . .

A

Connect the unit to TV.

A Connect the antenna, unit and TV as per “AV

Connection” (

pg. 12).

B Connect the unit’s S VIDEO OUTPUT (DVD)

connector to the TV’s S-VIDEO input connector.

B

Connect the unit to power source.

Plug the end of the AC power cord into an AC outlet.

C

Set the VCR channel to off.

A When the unit is turned off, press STOP (8) on the unit

for more than 5 seconds. “3 CH” appears on the front
display panel.

B Press CH +/– on the Remote to select “– CH” (off),

then press ENTER.

● If Plug&Play or Tuner setting has not previously been

performed, the Language Select screen appears and Plug&Play
takes place automatically.

NOTES:

● You can obtain high-quality S-VIDEO pictures.

● If your TV is not stereo-capable, use the unit’s AUDIO

OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction.

● To operate the unit with your TV using the S-VIDEO

connection, set your TV to its AV mode. You can also use the
TV/VCR button on the unit’s Remote to set JVC TV to the AV
mode.

● For switching the TV’s mode, refer to the instruction manual of

your television.

● Only DVD picture is output from S-VIDEO OUTPUT

connector. (VCR picture is not output.)

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/
VCR) connector to the TV’s VIDEO input connector.

TV

To S-VIDEO input

connector

AUDIO OUTPUT

S-Video cable

(not supplied)

AC outlet

AC power
cord

Back of unit

RF cable

(supplied)

S VIDEO OUTPUT

Antenna or Cable

Matching transformer
(not supplied)

Coaxial cable

Flat feeder

To 75 ohm
Terminal

VHF/UHF

OUT

VHF/
UHF IN

Audio/video

cable

(not supplied)

VIDEO OUTPUT

Before performing the following steps:

● Make sure there is no cassette inserted in the unit.

● Make sure the unit is turned on, then press VCR/

DVD on the unit or VCR on the Remote so that the
VCR indicator lights up.

XVC27UM_06Index.fm Page 13 Monday, June 14, 2004 4:20 PM

Advertising