Sound adjustments, Adjusting the sound, Turning on/off the loudness function – JVC KD-S700 User Manual

Page 14: Selecting and storing the sound modes

Advertising
background image

14

ENGLISH

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your
preference.

1

Select the item you want to adjust.

Each time you press the button, the
adjustable items change as follows:

Indication

To do:

Range

BAS

Adjust the bass.

–06 (min.)

(Bass)

|
+06 (max.)

TRE

Adjust the treble.

–06 (min.)

(Treble)

|
+06 (max.)

FAD*

Adjust the front

R06 (Rear only)

(Fader)*

and rear speaker

|

balance.

F06 (Front only)

BAL

Adjust the left

L06 (Left only)

(Balance)

and right speaker

|

balance.

R06 (Right only)

VOL

Adjust the volume.

00 (min.)

(Volume)

|
50 (max.)

Note:
* If you are using a two-speaker system, set the fader

level to “00.”

2

Adjust the level.

Note:
Normally the control dial works as the volume control.
So you do not have to select “VOL” to adjust the
volume level.

Turning on/off the loudness
function

The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce well-balanced sound at low volume level.
Each time you press LOUD, the loudness function
turns on and off alternatively.

Using the Sound Control
Memory (SCM)

You can select and store a preset sound
adjustment suitable to each playback source.
(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored each of the following
sources — FM1, FM2, FM3, AM and CD.
• If you do not want to store the sound mode

separately for each playback source, but want to
use the same sound mode for all the sources,
see “ To Cancel Advanced SCM” on page 18.

Select the sound mode you want.

Each time you press the button, the
sound mode changes as follows:

Equalization pattern changes as you
adjust the bass or treble.

Loud indicator

To increase the level.

To decrease the level.

SCM OFF

POP

SOFT

BEAT

FAD

BAL

VOL

BAS

TRE

(volume)

(bass)

(treble)

(fader)

(balance)

|\

EN14-16 KD-S7250/700/680[J]

26/10/01, 8:47 AM

14

Advertising