Antenna connections – JVC TV-13143 User Manual

Page 13

Advertising
background image

11

ANT

ANT

ANT

ANT

If you are using outdoor antenna (outdoor antenna not included), follow the instructions below that
correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV
connections.

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

ANTENNA CONNECTIONS

75 OHM
COAXIAL
CABLE

Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching trans-
former. Attach the transformer to the combiner, then
attach the combiner to the antenna jack.

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

VHF 300 ohm

UHF 300 ohm

300-75 OHM
MATCHING
TRANSFORMER
(not included)

COMBINER
(not included)

300-75 OHM
MATCHING
TRANSFORMER
(not included)

VHF 75 ohm

UHF 300 ohm

COMBINER
(not included)

Connect the 75 ohm cable from the combination VHF/
UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm
twin-lead wire, the use of the 300-75 ohm matching
transformer may be necessary.

Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
to the antenna jack.

5B20401A-E/P10-19

1/10/02, 4:53 PM

11

Advertising
This manual is related to the following products: