Jura Capresso F707 - Manual (Page 7)

7
Introduction
Thank you for purchasing the IMPRESSA. To ensure perfect function-
ing of your IMPRESSA, carefully read this operating manual and keep
it for future reference.
Should you need more information or if you encounter particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
You will also find useful tips on operation and maintenance of
your IMPRESSA on our website at www.jura.com.
1. Safety information
1.1 Warning
Ⅲ Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
Ⅲ The coffee machine may only be used by instructed persons.
Ⅲ Never use a defective coffee machine or a machine with a defective
mains cable.
Ⅲ Never repair or open the coffee machine yourself. Any repairs may
only be carried out by authorized service shops using ori ginal spare
parts and accessories.
Ⅲ Never immerse the coffee machine in water.
1.2 Precautions
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to any
water that may leak. Never stand on hot or warm surfaces (oven
hobs). Keep out of the reach of children.
Ⅲ If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
Ⅲ Always disconnect mains cable before cleaning the machine.
Ⅲ When disconnecting the mains cable never pull on the mains cable
or the machine itself.
Ⅲ The coffee machine is connected to mains supply via a mains cable.
Make sure nobody can trip over the mains cable. Make sure
children and pets cannot reach the machine
Ⅲ Never put the coffee machine or individual parts of it into a dish-
washer.
Ⅲ Make sure to install the machine at a place with sufficient air circu-
lation, to prevent overheating of the machine.
2. Preparing the IMPRESSA
2.1 Check supply voltage
The IMPRESSA is preset in the factory to the correct mains voltage.
Check if your local mains supply voltage complies with the infor -
mation given on the type plate on the underside of the IMPRESSA.
2.2 Check electrical fuse
The IMPRESSA is designed for an electric current of 10 amperes. Check
if the electrical fuse has sufficient capacity.
E