JVC CA-UXA7DVD - Manual (Page 46)

43
IMPORTANT:
Before performing any operations for DVD, SVCD and
VCD, make sure of the following:
• Check the connection with the TV.
• Turn on the TV and select the correct input on the TV to
view the pictures or on-screen menus/indications on the
TV screen.
• Select the correct color system.
Locating a Scene by Selecting the Chapter
Number—Chapter Search
Available for: DVD DVD
If the current title is divided into chapters, you can skip to
the chapter you want by selecting the chapter number.
• You cannot perform this function while the program or
the random play is activated.
On the remote control ONLY:
1
Press PLAY MODE during play.
The play mode screen appears on the TV.
2
Press Cursor
3/2 to move to “CHAP.
SEARCH,” then press ENTER.
“GO TO CHAPTER =” appears on the TV.
• The chapter search indication appears in the main
display.
3
Enter a chapter number by pressing the number
buttons (0 to 9).
• The 10 button works to enter “0.”
Ex.: To enter chapter number 3, press 3.
To enter chapter number 23, press 2 and 3.
To cancel misentry, repeat step 3 until the correct
number appears after “=.”
4
Press ENTER.
Playback starts from the beginning of the selected
chapter.
To erase the on-screen indication, press PLAY MODE
again.
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT CHAPTER REPEAT CHAPTER
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT CHAPTER
GO TO CHAPTER =
Locating a Position by Selecting the
Playing Time—Time Search
Available for: DVD DVD SVCD SVCD VCD VCD Anduio CD Audio CD
You can play a disc from the position you want by
specifying the elapsed time from the beginning of the
current title or track.
• You cannot use this function while a SVCD or VCD is
played back with the PBC function.
• You cannot use this function for some DVDs without
time information.
• You cannot perform this function while the program or
the random play is activated.
On the remote control ONLY:
1
Press PLAY MODE during play.
The play mode screen appears on the TV.
2
Press Cursor
3/2 to move to “TIME
SEARCH,” then press ENTER.
“GO TO” appears on the TV.
• You can specify the time as follows:
– For DVD: Hours, minutes, and seconds of the
current title
– For SVCD, VCD, or Audio CD:
Minutes and seconds of the current track
Ex.: While an DVD is played back.
• The time search indication appears in the main
display.
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT CHAPTER REPEAT CHAPTER
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT CHAPTER
GO TO
: :
EN42_48UX_A7DVD[UJ].pm6 03.2.25, 8:52 PM 43