JVC HR-XVS20E - Manual (Page 84)

Filename [XVS20EX_10Subsidiary.fm]
Masterpage:Left+
84
EN
Page 84 February 10, 2003 1:07 pm
SUBSIDIARY SETTINGS (cont.)
Clock Set
A
Turn on the unit.
Press 1.
B
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Access the Main Menu screen.
Press SET UP MENU.
D
Access the Clock Set screen.
Press rt to move the highlight bar (pointer) to “CLOCK
SET”, then press OK or e. The Clock Set screen appears.
NOTE:
When you have selected MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the
country setting (
੬
pg. 13, 18), you cannot use Just Clock
function. Skip steps F and G on page 85.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/S-VHS/DVD switch to the right.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set “ON” or “OFF” at the Clock
Set screen (the default setting is “OFF”). Press OK until the
Just Clock setting begins blinking, then press rt to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
unit’s built-in clock may be reduced, which could adversely
effect timer recording. We recommend you to keep Just
Clock on. In cases where the clock setting data from a PDC
signal is incorrect, however, you are advised to keep Just
Clock set to “OFF”.
IMPORTANT
If you performed Auto Set Up (
੬
pg. 13) or Preset
Download (
੬
pg. 15), without ever having set the clock
previously, the unit’s built-in clock is also set automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
OR
—you want to change Just Clock setting. (
੬
“Just Clock” in
the left column)
XVS20EX_01.book Page 84 Monday, February 10, 2003 1:07 PM