Before use – JVC CX-7000 Series User Manual
Page 8
Front
.
A
Sliding knob
v
Opens/closes the printer door.
v
Slide it upward, and pull toward you to open the printer door.
B
Operation buttons
v
For selecting and confirming information on the operation panel.
C
Operation panel
v
Displays the settings, operating status, and error messages.
D
Card hopper
v
For loading cards.
E
Printer door
F
Power switch
v
Turns the power On/Off.
Rear
.
A
USB cable connection terminal
v
For connecting a USB 2.0 interface cable.
B
LAN cable connection terminal
v
For connecting a LAN cable.
C
Cable clamp
v
For securing the supplied USB cable.
AC inlet
v
For connecting the power cord.
Right
.
A
NG card outlet
v
If a card is left inside the printer when the power is turned on or
reset, the card will be automatically discharged.
v
Cards in the printer are discharged when an error occurs in the
magnetic stripe card or IC card.
B
Air suction fan opening
v
Air inlet of the internal cooling fan.
C
Handle
v
Hold this area when moving the printer.
D
Filter cover
v
Cover of the fan filter.
E
Security slot
v
An anti-theft device that supports Kensington locks can be
installed.
Left
.
A
Card outlet
v
Outlet for discharging the cards.
B
Card stacker (supplied) attachment slot
v
For installing the supplied card stacker.
C
Infrared window
v
Sends or receives data via infrared communication by connecting
with an external unit.
D
Handle
v
Hold this area when moving the printer.
Before Use
8