JVC SR-VD400U - Manual (Page 66)

66
EN
i.LINK/DV
Connections
EDITING
S400
DV IN
D THEATER
REGION 1
i.LINK IN/OUT
DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R
Y
L
P B /C B
VIDEO
P R /C R
S VIDEO S VIDEO
AUDIO
IN(L-1)
IN(L-2)
REMOTE PAUSE/ AV COMPULINK
CABLE BOX ANTENNA
ANTENNA
OUT
IN
VHF/UHF
R L VIDEO AUDIO
OUT IN
COMPONENT
VIDEO OUT
A
This VCR supports the copy protection technologies
of DTLA (Digital Transmission Licensing
Administrator). These technologies are admitted by
DTLA (Digital Transmission Licensing
Administrator).
It is impossible to dub copy-limited signals between
the devices which supports copy protection
technologies of DTLA. It is impossible to dub to
other tapes the program which only one recording
is permitted.
When connecting to other devices, only the
operation of the devices which supports DTLA is
guaranteed. The operation of non-DTLA-supported
devices is not guaranteed.
To DV output
This VCR (for recording)
To DV IN
connector
DV cable
(not supplied)
DV camcorder
(for playback)
S400
DV IN
D THEATER
REGION 1
i.LINK IN/OUT
DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R
Y
L
P B /C B
VIDEO
P R /C R
S VIDEO S VIDEO
AUDIO
IN(L-1)
IN(L-2)
REMOTE PAUSE/ AV COMPULINK
CABLE BOX ANTENNA
ANTENNA
OUT
IN
VHF/UHF
R L VIDEO AUDIO
OUT IN
COMPONENT
VIDEO OUT
B
To i.LINK IN/
OUT connector
This VCR (for recording)
To i.LINK IN/
OUT connector
i.LINK cable
(not supplied)
Another VCR (for playback)
NOTES:
● You cannot use the i.LINK connection depending on the type
of camcorder equipped with the DV connector. In this case,
set “LINC” to “OFF” (
੬
pg. 62).
● If the 44.1 kHz PCM audio signal is input via DV connector,
recording cannnot be performed properly.
You can use a camcorder as the playback device and
your VCR as the recording VCR. You can use your VCR as the playback or recording
VCR.
Ex. When using this VCR as the recording VCR
VD400U-EN66-73 03.7.18, 1:10 PM 66