John Lewis JLTDC11 - Manual (Page 13)

1. Turn the programme selector to the
Time programme. The flashing 10' above
the Time button is on.
2. Press the Time button repeatedly until the
desired programme duration is shown in
the display, e.g. 20 for a programme of 20
minutes.
If the programme duration is not selected, the
duration is automatically set to 10 mins.
Delay start
With the Delay start button, you can
delay the start of a programme by
between 30 minutes (30') and a
maximum of 20 hours (20h).
1. Select the programme and additional
functions.
2. Press the Delay start button as many times
as necessary until the required Delay
start appears on the display, e.g. 12h if the
programme is to be started in 12 hours.
If the display is showing 20h and you
press the button again, the time delay
will be cancelled. The display will show
0'and then the duration of the selected
programme.
3. To activate the delay timer, press the
Start/Pause button. The amount of time
remaining until the programme is set to
start is continuously displayed (e.g. 15h,
14h, 13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a
programme being accidentally started or a
programme in operation being accidentally
changed. The child lock function locks all
buttons and the programme selector. The
child lock can be activated or deactivated by
holding down the Extra delicate and Intensive
buttons simultaneously for 5 seconds.
– Before programme is started:
Appliance cannot be used
– After programme is started:
Programme in operation cannot be
changed
The icon appears in the display to indicate
that the child safety device is activated.
The child safety device is not deactivated once
the programme comes to an end.
If you want to set a new programme, you must
first deactivate the child safety device.
13